-
How to Use the Vnnox Software
Step 3: How to Use the Online Software (VNNOX) To manage your LED sign online, there are three simple steps. Each step builds on the previous one, so it’s important to follow them in order. 1 Connect the Sign's Antenna to Wi-Fi Bring the sign online using the included network... -
Why Reposition the Sensor of the Outdoor LED Sign
Table of Contents Current Sign What is a Sensor? Why Reposition the Sensor? Repositioning the Sensor for Optimal Functionality How to Connect the Sensor (Video) 1. Current Sign 2. What is a Sensor? The sensor is a small device that monitors environmental conditions to optimize sign performance. Refer to the... -
How to Publish Content on the Sign Via Vnnox
Step 1: Create a Solution Click on the Solutions tab Click Add Solution on the top right Select Regular Solution Give your solution a name (e.g., "December Ads") Select the sign player Once the player is selected, the dimensions automatically adjust to your screen size Click OK You'll be taken... -
Waterproof RJ45 Connector
Connectors -
How to Enable Auto-Dimming on Your LED Sign
LED signs come standard with a built-in auto-brightness sensor to help your display stay visible in the day and comfortable at night. Depending on which software you’re using, the feature may already be enabled or may need to be turned on. XM Player Users Auto-dimming is preconfigured out of the box.... -
How to Set a Blackout Schedule in Viplex Handy Step By Step Guide
Table of Contents Before You Begin Step 1 — Connect the Sign Step 2 — Open Screen Status Control Step 3 — Add a New Schedule Step 4 — Set the Power On Schedule (Normal) Step 5 — Set the Power Off Schedule (Blackout) Important: Check the Sign’s Clock Before... -
Fix LED Sign Display Issues with NovaLCT C5.9.0
Experiencing wrong colors, over-bright sections, or dark patches on your LED sign?NovaLCT C5.7.1 lets you adjust color balance, brightness, and calibration to restore a uniform, vibrant display. 📥 Download NovaLCT C5.9.0 here — but be sure to consult your sign support technician before making any changes to avoid incorrect settings. -
Wall Mounting Guide for Programmable LED Signs
Mounting Basics Clearance: Sign must be installed 8 inches away from the wall. Sign Depth: 3.54 inches. Brackets: L-brackets along the perimeter of the sign. Installation: Sign can be directly bolted to the wall. Wedge Anchor Through Bolts Toggle Anchor Wedge Anchor Full -
How to Uncrate and Handle Your LED Sign
Your LED sign has arrived! Please follow these step-by-step instructions to safely uncrate and handle your new display without causing damage. 1. Keep the Crate Upright Always ensure the crate remains upright.The feet of the crate should be on the ground at all times. Do NOT lay the crate on... -
Special 3x4 LED Display Assembly Instructions
Brief Description: This 3' x 4' LED sign was specially divided into two 3' x 2' sections for international shipping via UPS. The split reduces package weight to approximately 61 lbs each—well under the 150 lb freight threshold—compared to 176 lbs if shipped as a single unit. Upon arrival, the...
