Blog

  • Permits and Installation

    Electronic Changeable Copy Sign Regulations in St. Peters, MO

    1. Maximum Signage Area by Zoning District General Regulations: Changeable copy signs may not exceed 24 square feet per sign face or 48 square feet total aggregate sign area. Must be permanently mounted or affixed to a structure. Must advertise goods or services available only on the premises. 2. Zoning...
  • Permits and Installation

    A Comprehensive Guide to Digital Sign Permitting in North Brunswick, NJ

    Installing a digital sign in North Brunswick, NJ, requires careful planning to ensure compliance with local zoning regulations and permitting criteria. This guide outlines the critical aspects of digital sign permitting in the township, including size restrictions, placement guidelines, content rules, and prohibited features. Understanding these criteria will help you...
  • Permits and Installation

    Do's and Don'ts for Digital Readerboard Signs in Anniston, Alabama

    Digital readerboard signs are a powerful tool for businesses to convey messages, but Anniston, Alabama, enforces strict regulations on their use. This guide outlines the rules and restrictions to help ensure your sign complies with local codes. Permitted Zoning Districts Digital readerboards are only allowed in the following zones: Suburban...
  • Permits and Installation

    Zoning and Signage Rules for North Brunswick Township, NJ

    For businesses interested in installing a digital outdoor sign that plays video, here are the relevant rules and restrictions based on local ordinances: Prohibited Signs Video and Animated Displays: Signs that simulate motion, blink, flash, vibrate, or use sequential lighting are prohibited, except in the TMU Zone for movie theater...
  • Permits and Installation

    What to Know Before Applying for an Electronic Message Sign Permit in Northport Village, NY

    General Rules for Electronic Signs: Video Signs: Signs that simulate motion or use video are generally prohibited unless located inside commercial or industrial establishments where they are not visible from public spaces or residential areas. Illumination Standards: Signs must not exceed 50 footcandles of illumination. Illumination should not interfere with...
  • Permits and Installation

    Key Considerations for EMC Installation With LED Sign City

    Upgrading to an LED sign is a powerful way to boost visibility and engagement for your organization. From installation and management to long-term support, understanding the essential details can help you make the most of this investment. Here, we outline what to expect at each stage, including site surveys, display...
  • Permits and Installation

    How to Plan LED Sign Installation: Essential RFIs to Streamline the Project

    Installing a new LED sign can significantly boost visibility and communication for businesses, resorts, and community services alike. However, a successful LED sign installation involves careful planning to ensure compliance with local ordinances, optimize visibility, and meet power and structural requirements. 1. AddressDetermines the applicable jurisdiction (county or town) for...
  • Permits and Installation

    How to Survey A Parapet Wall for Sign Installation

    When it comes to mounting a sign on the parapet of a building, accurate measurements and thorough site surveys are critical to ensure a seamless installation. For those new to the process, this guide will walk you through the key information and photos required to complete a parapet wall site...
  • Permits and Installation

    Sterling Heights, Michigan: Electronic Message Boards and Freestanding Sign Regulations

    1. Introduction to Electronic Message Boards 2. Key Regulations for Electronic Message Boards 3. Emergency Public Service Messaging 4. Internal Illumination Restrictions for Residential Properties 5. Permanent and Temporary Freestanding Sign Regulations 1.Introduction to Electronic Message Boards in Sterling Heights This ordinance establishes guidelines for electronic message boards and freestanding signs in Sterling Heights, Michigan,...
  • Permits and Installation

    Setup Guide for Curved LED Signs: Assembly and Wiring of Modular Panels

    The 4x20 feet single-sided LED sign is a high-visibility digital billboard designed for optimal performance and durability. This assembly guide will walk you through the step-by-step process of constructing the sign, from securing the edges to connecting the wiring, ensuring a seamless setup. With detailed structure diagrams and clear instructions, you'll have...
Svg Vector Icons : http://www.onlinewebfonts.com/icon
We Value Your Privacy We use cookies to improve your experience, deliver personalized content, serve relevant ads, and analyze our traffic. By selecting "Accept All," you agree to the use of all cookies." For more information, see our Cookie Policy
You have successfully subscribed!
This email has been registered