Are LED Signs Allowed in Union Point, Greene County, Georgia? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
❌ No. Electronic Message Center (EMC) or LED signs are not allowed within the City of Union Point.
The city’s sign ordinance (Sec. 9.7.4.3) prohibits flashing, blinking, fluctuating, or otherwise animated signs within 150 feet of any public right-of-way. Since EMCs function via electronic illumination that changes or fluctuates, this effectively bans EMCs citywide.
Official Ordinance Language:
“No flashing, blinking, fluctuating, or otherwise animated sign shall be permitted within 150 feet of a public right-of-way. Any sign which contains flashing or intermittent red, green or amber illumination (excluding official traffic control devices) shall be strictly prohibited.”
(Union Point Code of Ordinances § 9.7.4.3)
🔗 Full Ordinance – City of Union Point Sign Code
🔗 Zoning & Parcel View – City of Union Point Zoning & Parcel View
There is no variance, conditional-use, or appeals process available for electronic or animated sign exceptions.
Summary Table (Not Applicable)
Since EMCs are prohibited, additional zoning tables, installation types, or permitting requirements do not apply.
Zoning District Overview
Union Point regulates signs through a combination of general provisions, commercial, industrial, and residential rules:
-
Residential Districts (R-1, R-1A, R-2, R-3): Only unilluminated real estate sales/lease signs are allowed (max 16 sq. ft.), no other outdoor advertising.
-
Commercial Districts (C-1, C-2): One outdoor advertising sign per lot frontage; max 400 sq. ft. per structure facing; signs cannot be placed in the public right-of-way.
-
Industrial Districts (M-1): One outdoor advertising sign per 75 ft. of frontage; max 400 sq. ft. per structure facing.
-
General Rules: Signs must comply with setback, height, and maintenance requirements outlined in Section 9.7.
Prohibited Signs
-
Animated, flashing, blinking, or fluctuating signs (including all EMCs) within 150 ft of public right-of-way.
-
Signs on rooftops, fences, trees, utility poles, or similar structures.
-
Signs imitating traffic control devices or using words like “Stop” or “Danger.”
-
Portable, sandwich-type, curb, or twirling signs.
-
Signs advertising off-premises businesses.
Permit Filing Requirements
Since EMCs are not allowed, no permit exists for electronic message centers. Businesses must follow standard permitting rules for static signs:
-
Permit forms required: Standard Zoning Permit for sign installation.
-
Fees: Vary by size and district; consult Union Point Planning Department.
-
Official portal: Union Point Planning & Zoning
Full Ordinance Text (Verbatim)
The Union Point Code of Ordinances § 9.7 governs all signs in the city, including location, size, height, and setbacks. Key provisions include:
-
General Rules: All signs except outdoor advertising are allowed without a permit. Outdoor advertising must meet district-specific height, setback, and area requirements.
-
Residential Districts (R-1, R-1A, R-2, R-3): Only unilluminated real estate signs are permitted, limited to 16 sq. ft., one per street frontage, and must be removed within 30 days of sale or lease.
-
Commercial Districts (C-1, C-2): One outdoor advertising sign per lot frontage (max 400 sq. ft.), not in the right-of-way. Multiple signs on a single structure may be combined if under 300 sq. ft. each.
-
Industrial District (M-1): One outdoor advertising sign per 75 ft. of lot frontage, not exceeding 400 sq. ft. per structure facing.
-
Prohibited Signs: Animated, flashing, blinking, or otherwise changing signs (including EMCs), signs on rooftops, fences, poles, portable signs, and any off-premises advertising.
-
Maintenance: All signs must be maintained in good repair. Abandoned or non-functional signs must be removed within 30 days.
External References
🗺️ Union Point Zoning & Parcel View
📘 Union Point Zoning Sign Code
📝 Permit Application Portal