Are LED Signs Allowed in Rome, Floyd County, Georgia? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
✅ Yes. EMC signs are permitted in designated commercial and industrial zoning districts within Rome and Floyd County. However, there are specific restrictions and requirements to ensure compliance with local ordinances.
Official Ordinance Excerpt:
"Each temporary special event sign shall not exceed six square feet in a residential zoning district or 32 square feet in a nonresidential zoning district."
🔗 Full Ordinance – City of Rome Sign Code
🔗 Zoning & Parcel View – City of Rome Zoning & Parcel View
EMC Sign Summary Table
| Feature | Answer |
|---|---|
| Zoning districts that allow EMCs | Commercial, Industrial |
| EMC sign styles allowed | Wall, Monument, Freestanding |
| Off-premise EMCs allowed | ❌ No |
| EMCs allowed in public right-of-way | ❌ Not specified |
| Minimum setback required | ❌ Not specified |
| Use restrictions | Subject to local and state regulations |
Zoning District Overview
Rome and Floyd County's zoning framework is governed by the Unified Land Development Code. This code outlines the standards that control the number, type, and placement of signs on individual properties or buildings.
Zoning Districts Overview:
-
Commercial Districts: Designated areas where commercial activities are permitted.
-
Industrial Districts: Areas designated for industrial activities.
-
Residential Districts: Primarily for residential purposes; signage regulations are more restrictive.
Zoning-Specific Standards
Commercial Zoning Table
| Requirement | Commercial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Wall, Monument, Freestanding |
| Maximum number of EMCs | 1 per street frontage |
| Maximum area (wall-mounted) | 25 sq. ft. or 3 sq. ft/linear ft |
| Maximum height | 20 ft or roofline |
| Static illumination | ✅ Yes |
| Animated signs | ❌ No |
| Mechanical motion | ✅ Yes |
| Off-premise content | ❌ No |
| Right-of-way projection | 24 inches max |
| Setback required | 10 ft from ROW |
Industrial Zoning Table
| Requirement | Industrial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Wall, Monument, Freestanding |
| Maximum number of EMCs | 1 per frontage |
| Maximum area (wall-mounted) | 100 sq. ft. total |
| Maximum height | 20 ft |
| Static illumination | ✅ Yes |
| Animated signs | ❌ No |
| Mechanical motion | ✅ Yes |
| Off-premise content | ❌ No |
| Right-of-way projection | ❌ Not allowed |
| Setback required | 10 ft from property line |
Permit Filing Requirements
Required Forms:
-
Zoning Permit Application
-
Electrical Permit (if applicable)
Permit Fees:
-
Approximately $150 - $500, depending on size and district
Local Project Example
An LED sign was installed at a local church located on Broad Street under the CMX-2 zoning district. The sign adhered to all setback and height regulations and was permitted within 14 business days.
Full Ordinance Text
For detailed information, refer to the full ordinance text in the Rome Code of Ordinances – Article 5: Sign Regulations.
External References
🗺️ Rome Zoning & Parcel View
📘 Rome Zoning Sign Code
📝 Permit Application Portal