Are LED Signs Allowed in Ogdensburg, St. Lawrence County, New York? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
✅ Yes, Electronic Message Center (EMC) signs are permitted in Ogdensburg, New York, under specific conditions outlined in the city's zoning ordinance. These regulations ensure that EMC signs are installed and operated in a manner that aligns with community standards and safety considerations.
🔗 Full Ordinance – City of Ogdensburg Sign Code
🔗 Zoning & Parcel View – City of Ogdensburg Zoning & Parcel View
EMC Sign Summary Table
| Feature | Answer |
|---|---|
| Zoning districts that allow EMCs | Commercial, Industrial |
| EMC sign styles allowed | Ground Signs |
| Off-premise EMCs allowed | ❌ No |
| EMCs allowed in the public right-of-way | ❌ No |
| Minimum setback required | 5 feet from the public right-of-way |
| Maximum height | 20 feet |
| Illumination allowed | ✅ Yes |
| Flashing or rotating messages allowed | ❌ Not allowed |
| Message change interval | Every 5 minutes |
| Use restrictions | Must comply with sign ordinance and guidelines |
Zoning District Overview
Ogdensburg's zoning framework includes various districts where signage is regulated. Specific regulations for signage can be found in the city's sign code.
Zoning-Specific Standards
Commercial Zoning Table
| Requirement | Commercial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Ground Signs |
| Maximum number of EMCs | 1 per street frontage |
| Maximum area | 48 sq. ft. total; 24 sq. ft. per face |
| Maximum height | 20 ft |
| Message change interval | 5 minutes |
| Flashing or rotating messages | ❌ Not allowed |
| Off-premise content allowed | ❌ No |
| Right-of-way projection | ❌ Not allowed |
| Setback required | 5 ft from public right-of-way |
Industrial Zoning Table
| Requirement | Industrial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Ground Signs |
| Maximum number of EMCs | 1 per street frontage |
| Maximum area | 48 sq. ft. total; 24 sq. ft. per face |
| Maximum height | 20 ft |
| Message change interval | 5 minutes |
| Flashing or rotating messages | ❌ Not allowed |
| Off-premise content allowed | ❌ No |
| Right-of-way projection | ❌ Not allowed |
| Setback required | 5 ft from public right-of-way |
Permit Filing Requirements
To apply for an EMC permit in Ogdensburg:
-
Required forms: Sign Permit Application, Electrical Permit (if applicable)
-
Permit fee: Contact the Ogdensburg Building Department for current rates
-
Approval process: The Planning Board reviews applications to ensure compliance with zoning regulations.
Local Project Example
A recent installation of a 4x8 EMC sign at a retail location on State Street in the C-2 district adhered to all setback and height requirements. The project received approval from the Planning Board and was completed within the standard permit processing time.
Full Ordinance Text
This document outlines the regulations governing the erection, construction, display, and relocation of signs within Ogdensburg, New York. It includes provisions for various types of signs, including Electronic Message Centers (EMCs), and specifies requirements such as permit applications, design standards, and compliance with zoning regulations.
Please review the full ordinance to ensure compliance with all applicable requirements before proceeding with the installation or modification of an EMC sign in Ogdensburg.
External Reference Links
🗺️ Ogdensburg Zoning & Parcel View
📘 Ogdensburg Zoning Sign Code
📝 Permit Application Portal