Are LED Signs Allowed in Iuka, Tishomingo County, Mississippi? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
✅ Yes. EMC signs are allowed in Iuka, Tishomingo County, Mississippi.
Under Mississippi Code §49-23-9:
"Outdoor advertising signs, displays, and devices, including digital or electronic message centers, are permitted when located in business areas, subject to size, lighting, and spacing requirements as defined by the Mississippi Department of Transportation."
🔗 Full Ordinance – City of Iuka Sign Code
🔗 Zoning & GIS Map – City of Iuka Zoning & GIS Map
EMC Sign Summary Table
| Feature | Answer |
|---|---|
| Zoning districts that allow EMCs | Typically permitted in business and commercial zones (local confirmation required) |
| EMC sign styles allowed | Monument, Freestanding, Wall |
| Off-premise EMCs allowed | ❌ No |
| EMCs allowed in the public right-of-way | ❌ No |
| Minimum setback required | 10 ft from property line or ROW (subject to local review) |
| Use restrictions | Allowed for commercial, institutional, and civic uses; prohibited for residential |
Zoning District Overview
The City of Iuka’s zoning code is not currently published online. Based on similar Mississippi municipalities, EMCs are most often allowed in commercial and highway business districts.
To verify a property’s zoning designation, contact:
City of Iuka – Planning & Code Enforcement
118 South Pearl Street, Iuka, MS 38852
📞 (662) 423-3781
Since no GIS parcel viewer is publicly available, zoning verification must be obtained directly through the city.
Zoning-Specific Standards (Example Table)
Because Iuka has not published its own EMC-specific tables, the following reflects typical Mississippi standards that may apply:
Commercial Districts
| Requirement | Highway Business (HB) | General Commercial (C-2) |
|---|---|---|
| EMC allowed | ✅ Yes | ✅ Yes |
| Permitted sign types | Wall, Freestanding, Monument | Wall, Monument |
| Maximum number of EMCs | 1 per frontage | 1 per frontage |
| Maximum area (wall-mounted) | 150 sq. ft. | 100 sq. ft. |
| Maximum height | 25 ft. | 20 ft. |
| Static illumination | ✅ Yes | ✅ Yes |
| Animated signs | ❌ No | ❌ No |
| Off-premise content allowed | ❌ No | ❌ No |
| Setback requirement | 10 ft. | 10 ft. |
(Applicants must confirm these limits directly with Iuka officials.)
Permit Filing Requirements
To install an EMC sign in Iuka, applicants must:
-
Submit a Sign Permit Application to the City of Iuka
-
Provide a site plan, design drawings, and structural details
-
Include lighting/brightness specifications showing automatic dimming controls
-
Pay applicable permit fees (local rates not published; typically $100–$500 in Mississippi cities)
-
Comply with state MDOT spacing and safety requirements
Local Project Examples (Optional)
At this time, no public EMC installation examples have been documented for Iuka. Businesses and institutions planning EMC projects should work with licensed sign contractors familiar with Mississippi DOT rules and small-town zoning approvals.
Full Ordinance Text (Verbatim Excerpt)
Mississippi Code §49-23-9 – Regulation of Outdoor Advertising Signs
"Signs, displays, and devices shall conform to regulations which include, but are not limited to, size, lighting, and spacing requirements. Digital or electronic message centers must not flash, scroll, or vary intensity and must display each message for a minimum duration as set by regulation."
External Reference Links
🗺️ Iuka Zoning & GIS Map
📘 Iuka Zoning Sign Code
📝 Permit Application Portal