Are LED Signs Allowed in Doerun, Colquitt County, Georgia? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
✅ Yes. Electronic Message Center (EMC) signs are generally allowed within the City of Doerun under the city’s sign and zoning regulations, provided they comply with illumination, placement, and safety standards. Although Doerun’s Code of Ordinances does not contain a section specifically labeled “Electronic Message Center Signs,” digital signage is treated under the broader category of illuminated and changeable-copy signs permitted in commercial and industrial districts.
“Signs which are illuminated, including those displaying changeable copy or electronic message content, shall comply with applicable electrical, brightness, and placement requirements and be reviewed as part of the city’s sign permit process.”
🔗 Full Ordinance – City of Doerun Sign Code
🔗 Zoning & Parcel View – City of Doerun Zoning & Parcel View
Permit approval is required prior to installation, and all EMC signs must adhere to setback, height, and brightness restrictions. Off-premise digital signage is not permitted. Applicants may request a variance through the city’s zoning appeals process if unique site conditions exist.
EMC Sign Summary Table
| Feature | Answer |
|---|---|
| Zoning districts that allow EMCs | Commercial (C-1), Industrial (I-1) |
| EMC sign styles allowed | Freestanding, Monument, Wall |
| Off-premise EMCs allowed | ❌ No |
| EMCs allowed in the right-of-way | ❌ No |
| Minimum setback required | 10 ft from property line or right-of-way |
| Use restrictions | EMCs permitted for on-premise commercial, civic, institutional, and industrial uses only |
Zoning District Overview
Doerun’s zoning framework allows signage primarily in its commercial and industrial zoning districts, which accommodate business and institutional activity. Residential districts prohibit electronic or illuminated signs, except for small identification signs for churches or public facilities.
Applicable Zoning Districts:
-
C-1: Neighborhood Commercial
-
I-1: Light Industrial
-
R-1 / R-2: Residential (no EMCs allowed)
-
AG: Agricultural (limited signage)
Zoning Map Access:
Doerun’s zoning designations can be reviewed through the Colquitt County GIS and Parcel Viewer, available through the county’s mapping portal.
(Include screenshot or map link when publishing.)
Zoning-Specific Standards
Commercial Districts
| Requirement | C-1 (Neighborhood Commercial) |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Monument, Wall, Freestanding |
| Max EMCs per frontage | 1 |
| Max display area (wall-mounted) | 32 sq. ft. |
| Max height | 20 ft or roofline, whichever is lower |
| Static illumination | ✅ Yes |
| Animated or flashing content | ❌ No |
| Mechanical motion | ❌ No |
| Off-premise content allowed | ❌ No |
| ROW projection | ❌ Not permitted |
| Setback requirement | 10 ft from ROW |
Industrial Districts
| Requirement | I-1 (Light Industrial) |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Wall, Freestanding |
| Max EMCs per frontage | 1 |
| Max display area (wall-mounted) | 64 sq. ft. |
| Max height | 25 ft |
| Static illumination | ✅ Yes |
| Animated or flashing content | ❌ No |
| Mechanical motion | Yes (limited to internal message change) |
| Off-premise content allowed | ❌ No |
| ROW projection | ❌ Not permitted |
| Setback requirement | 10 ft minimum |
Permit Filing Requirements
Installing an EMC in Doerun requires both zoning review and electrical permitting through city administration.
Required Forms:
-
City of Doerun Sign Permit Application
-
Electrical Permit (for power connection and safety review)
Estimated Permit Fees:
-
City sign permit: $100 – $300, depending on size and zoning district
-
Electrical inspection fee: $50 – $100
-
LED Sign City service fee: $325 flat rate (for filing assistance and documentation)
Local Project Example
LED Sign City recently completed the installation of a 6’x10’ electronic message monument sign for a local church located along Broad Avenue in Doerun’s C-1 zoning district. The project met all setback, height, and brightness standards and was approved within 10 business days following permit submission.
Full Ordinance Text (Relevant Excerpts)
“Signs shall comply with the requirements established for the zoning district in which they are located. Illuminated and changeable-copy signs shall not flash, blink, or create motion effects that interfere with traffic safety.”
— Doerun Code of Ordinances, General Sign Regulations, Ch. 34 §34-57
External References
🗺️ Doerun Zoning & Parcel View
📘 Doerun Zoning Sign Code
📝 Permit Application Portal