Are LED Signs Allowed in Dawsonville, Dawson County, Georgia? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
❌ No. EMC signs are not permitted within the City of Dawsonville.
"Some signs are not allowed within the City limits of Dawsonville. These include signs creating traffic hazards, flashing signs, mobile or portable signs, vehicle signs, roof signs, and other non-durable material signs."
🔗 Full Ordinance – City of Holly Springs Sign Code
🔗 Zoning & Parcel View – City of Holly Springs Zoning & Parcel View
Currently, there is no variance or conditional use process listed for EMCs.
Ordinance Statement
Direct excerpt from the Dawsonville Signage page:
"Signs must be placed on private property and set back at least 10 feet from the right-of-way. Signs creating traffic hazards, hazardous signs, flashing signs, mobile or portable signs, and other non-durable materials are prohibited."
Summary Table (❌ Not Applicable)
Since EMCs are prohibited, zoning tables, installation types, or permitting requirements for EMCs do not apply.
Zoning Overview
Dawsonville regulates all signage through Chapter 102 of the City’s Zoning Ordinance, which includes:
-
Permits required for permanent signs
-
Setbacks: Minimum 10 ft from right-of-way
-
Banners: Permitted with a temporary permit, up to 4 times per year
-
Real Estate signs: No permit needed if ≤15 sq. ft. (residential) or ≤40 sq. ft. (commercial)
Sign Placement: Only on private property; signs in right-of-way, medians, sidewalks, or utility poles are prohibited.
External References
🗺️ Holly Springs Zoning & Parcel View
📘 Holly Springs Zoning Sign Code
📝 Permit Application Portal