Are LED Signs Allowed in Crisp County, Georgia? A Guide to Permits, Sizes, and Zoning
EMC Sign Allowed?
✅ Yes. Electronic Message Center (EMC) signs are permitted in designated commercial and industrial zoning districts within Arabi, Crisp County.
"Electronic message center signs are permitted in commercial and industrial districts, subject to compliance with the requirements of this article."
🔗 Full Ordinance – Crisp County Sign Code
🔗 Zoning & Parcel View – Crisp County Zoning & Parcel View
EMC Sign Summary Table
| Feature | Answer |
|---|---|
| Zoning districts that allow EMCs | Commercial, Industrial |
| EMC sign styles allowed | Wall, Freestanding, Monument |
| Off-premise EMCs allowed | ❌ No |
| EMCs allowed in public right-of-way | ❌ Not allowed |
| Minimum setback required | 10 ft from property line |
| Use restrictions | EMCs permitted for commercial or industrial uses only |
Zoning District Overview
Arabi, located within Crisp County, falls under the county's zoning regulations. The county's zoning code includes provisions for commercial and industrial districts where EMC signs are permitted.
Zoning-Specific Standards
Commercial Zoning Table
| Requirement | Commercial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Wall, Freestanding, Monument |
| Max EMCs per frontage | 1 |
| Max area (wall-mounted) | 25 sq. ft. or 3 sq. ft/linear ft |
| Max height | 20 ft or roofline |
| Static illumination | ✅ Yes |
| Animated signs | ❌ No |
| Mechanical motion | ✅ Yes |
| Off-premise content allowed | ❌ No |
| ROW projection | Max 24" |
| Setback required | 10 ft |
Industrial Zoning Table
| Requirement | Industrial Districts |
|---|---|
| EMC allowed | ✅ Yes |
| Permitted sign types | Wall, Freestanding, Monument |
| Max EMCs per frontage | 1 |
| Max area (wall-mounted) | 100 sq. ft. |
| Max height | 20 ft |
| Static illumination | ✅ Yes |
| Animated signs | ❌ No |
| Mechanical motion | ✅ Yes |
| Off-premise content allowed | ❌ No |
| ROW projection | ❌ Not allowed |
| Setback required | 10 ft |
Permit Filing Requirements
Required forms:
-
Zoning Permit Application
-
Electrical Permit
Permit fee: Approximately $150 - $500, depending on size and district
LED Sign City permit service fee: $325 flat rate
Local Project Example
LED Sign City installed a 4x8 EMC at a church on Broad Street under a commercial zoning district. The sign met all setback and height regulations and was permitted within 14 business days.
External References
🗺️ Crisp County Zoning & Parcel View
📘 Crisp County Zoning Sign Code
📝 Permit Application Portal