Setup Guide for Curved LED Signs: Assembly and Wiring of Modular Panels

The 4x20 feet single-sided LED sign is a high-visibility digital billboard designed for optimal performance and durability. This assembly guide will walk you through the step-by-step process of constructing the sign, from securing the edges to connecting the wiring, ensuring a seamless setup. With detailed structure diagrams and clear instructions, you'll have all the information needed to assemble your LED sign with confidence, whether you're a seasoned professional or a first-time installer.

1. Introduction

Purpose: To provide step-by-step instructions for assembling the modules into a digital billboard.

Step 1: Start with the Edges

Details: Begin assembling the LED sign by securing the edges first.
Instruction: Cable tunnel is open with a preinstalled rubber seal (ensure rubber seal is in every slot before connecting the M8 bolts)

Step 2: Align the Sections

Details: Align the sections linking A-1 to A2

Step 3: Secure with a Bolt

Details: Insert bolts into the pre-drilled holes.
Instruction: Use the provided bolts to secure the modules to the frame

Step 4: Tighten the Bolt

Details: Ensure all bolts are tightened to stabilize the structure.
Instruction: Use appropriate tools to tighten the bolts securely.

Step 5: Connect The Wires

Details: Connect the wiring for both signal and electrical power.
Instruction: Follow the wiring diagrams to connect the signal cables and electrical wires correctly.