LED Sign and Lightbox Installation on Single Pole in Dallas, TX
1) Project Summary
Install a 3' × 5' double-sided outdoor LED sign with an integrated 1' × 5' illuminated lightbox on a new single-pole mount
2) LED Sign Dimensions
Front view of 3' × 5' double-sided LED sign
Rear view of 3' × 5' double-sided LED sign
Side view: 3' × 5' double-sided LED sign
Sign-side mounting brackets
Mounting brackets are provided to attach the LED sign display to the angular frame.
| LED Sign Display Dimensions: | 37.8" × 63.0" × 3.4" |
| Power Requirements: | 3.0 AMPS @ 110V or 6.5 AMPS @ 220V / Side |
| Weight: | 150 lbs / side |
3) Bid Required
Please submit an itemized bid covering the complete scope below.
- Site survey (if any) before installation
- The installer provides engineered drawings before installation, with the note that since the property owner handles the permit, the drawings will be forwarded to confirm the sign was installed per code
- Expected installation date: July 27–31
- Pole and foundation/base (as required by site conditions and local code)
- Internally illuminated lightbox fabrication (files to be shared per customer scope)
- The lightbox and LED sign must have a uniform depth to present as a single cohesive unit — whichever component is wider sets the standard, and the other must match.
- Structural frame/support system to mount the double-sided LED sign to the pole, including any required engineered or stamped drawings
- Perforated metal shroud (full wrap trim cover) to fully enclose the rear and sides of the LED sign
- Installation — set pole and mount the two signs (static and digital), including all on-site labor, equipment, and materials
- Electrical (optional line item): Final termination and connection at the existing electrical/junction box only — no trenching, no new circuits or feeders
- Terms and conditions apply
Not included in scope:
- LED sign supply
- Software programming and support
4) Bid Submission
- Email: projects@ledsigncity.com
- Subject line: Bid – Sign Installation – Dallas, TX
5) Site Map & Location Reference
Installation Location
4900 S. Lancaster Rd
Dallas TX 75216
Existing Site Condition
Proposed Rendering
Proposed Sign with Lightbox
Angular Frame
Full Wrap Trim Cover (Perforated Metal Shroud)
Exploded Assembly View
Side View
Minimum depth between the two sides of the sign — this may be wider based on installation scope and engineer recommendation. The lightbox and LED sign must have a uniform depth to maintain a single cohesive structure. If one is widened, the other must match.
6) Wiring Specifications: How to Connect the Sign
Electrical Recommendations
- Two dedicated 20-amp circuits at 110V — one per side. Circuits must not be shared and must not be on a timer.
- An indoor disconnect switch is recommended to allow power to be safely cut in the event of an emergency or extreme weather.
- The power connection point should be within 5 feet of the sign to accommodate the sign's onboard cables. Running power to that point — whether from a breaker panel, conduit, or junction box — is outside the scope of installation and should be handled by a licensed electrician.
7) How to Install the LED Sign on a Single Pole
