Project: Adjusting Sign Center Alignment; Replacing Brightness Sensor

Objective

1. Adjust the center alignment of the sign by bringing the two sides closer together.
2. Replace the brightness sensor and confirm proper software functionality.

---

Step 1: Adjusting the Center Alignment

1. Loosen the Sign on the Brackets

   • Loosen the bolts securing the sign on the brackets to create additional space for adjustment.

2. Remove Modules for Access

   • On both sides of the sign, remove two modules from the top and bottom rows to allow space for hand access to the center bolts.

3. Pass Through & Secure the Center Bolts

   • Insert the center bolt through the pre-drilled holes on one side.
   • Secure the bolt by fastening the nut on the other side.
   • Use the two pre-drilled holes per row as needed to close the gap and achieve proper alignment.

---

Step 2: Replacing and Testing the Brightness Sensor

 

1. Replace the Sensor

   • Unplug the old sensor.
   • Connect the new sensor securely.

2. Verify Sensor Connection in Software

   • Log into the software installed on the client PC or phone.
   • Navigate to Terminal Control > Sensor.
   • Check the sensor reading to confirm that it is properly connected.

---

Final Check

• Ensure the center alignment is secure and stable.
• Confirm that the brightness sensor is functioning correctly in the software.
• Perform a visual inspection to verify all modules are reinstalled properly.