Module Replacement for Elite Series Taxi Top Display

in latest new 1 min read

Steps for Removing the Module in the Elite Extraslim Taxi Top Display

  1. Gather Tools and Materials:

    • T10 torque tamper-proof screwdriver
  2. Remove End Screws:

    • Use the T10 torque tamper-proof screwdriver to remove the screws on both ends of the display.
  3. Lift Housing:

    • Carefully lift the housing, ensuring you do not damage the module inside.
  4. Remove Pin:

    • Locate and remove the pin securing the module to the housing.
  5. Remove Old Module:

    • Gently take out the old module from the housing.

Steps for Installing the Module in the Elite Extraslim Taxi Top Display

  1. Gather Tools and Materials:

    • Replacement module
    • T10 torque tamper-proof screwdriver
  2. Install New Module:

    • Place the new module into the housing.
    • Secure the module with the pin.
  3. Reattach Housing:

    • Slowly lower the housing back into place over the new module.
  4. Secure End Screws:

    • Reinsert and tighten the screws on both ends of the display using the T10 torque tamper-proof screwdriver.
  5. Final Check:

    • Ensure all components are securely fastened and the display is functioning properly.
You have successfully subscribed!
This email has been registered