All About Outdoor Digital Signage Installation: A Stage-by-Stage Breakdown ✨
So you've just ordered a brand new LED sign to spiff up your storefront or announce your grand opening . But before you can see it dazzling passersby, there's an important process to follow: installation!
This blog post will walk you through the different stages involved in getting your sign up and running smoothly. Let's dive in!
Stage 1: Planning and Permitting (Min Duration: 2 Weeks)
This initial stage lays the groundwork for your sign's arrival. Here's what happens:
- Conduct Site Survey: Our team will visit to assess the existing electrical setup, verify the strength of the mounting structure, and check the site dimensions. We'll ensure the structure can support the weight, height, and width of your new sign.
- Develop Engineered Drawings: Based on our survey, we'll create engineered drawings, as required by local regulations, to ensure compliance and secure installation.
- Research Local Regulations: We’ll review recent zoning ordinances and verify signage area limitations and other requirements to make sure your sign aligns with all local codes.
-
Submit Permit Application*: We’ll manage the permit process, following up with relevant authorities, including the Department of Transportation, if necessary, to address any Right of Way (ROW) considerations.
Note: ROW surveys and certificates from land surveyors are not included in the installation package. - Review Electrical Requirements: LED signs often need dedicated breaker panels and electrical permits. We'll collaborate with you and your electrician to clarify these needs.
Stage 2: Production and Delivery (Min Duration: 4-6 Weeks)
Once the planning and permitting are complete, it's time to bring your sign to life!
- Manufacture the LED sign: ️ We'll start building your sign, including the display and lightbox (if requested).
- Quality and Safety Checks: We'll conduct thorough inspections to ensure your sign meets the highest quality and safety standards.
- Programming: We'll customize your sign's firmware according to your specifications.
- Packaging: We'll securely package your sign for safe transport to the installation site.
- Electrical permit (if required): If needed, an electrical permit will need to be obtained (value added service) to ensure your sign will be getting adequate voltage.
- Prepare the installation site: If required, we’ll coordinate with an electrician to ensure wiring is ready at the site. Running a new power line, if needed, is available as a value-added service.
Stage 3: Installation (Min Duration: 1 week)
The final stage is when your sign gets mounted and starts shining bright!
- Ship the Sign: We’ll deliver your sign to the nearest installation-ready location.
- Assemble and Secure the Sign: The installation team will assemble the frame and securely install the LED display and lightbox (if applicable).
- Prepare the Site: This includes removing any existing signage. Constructing new mounting structures (value-added service)
- Fortify the Structure (if necessary): If additional structural support is needed, we’ll ensure it’s in place.
- Install and Test: The installation team will mount the sign, connect the electrical components, and conduct tests to ensure optimal performance.
Conclusion
There you have it! This comprehensive breakdown should give you a clear picture of what to expect during the installation process for your new LED sign. Now you can sit back, relax, and get ready to see your sign become a beacon for your business!
Note: The timelines mentioned are estimates and may vary depending on your specific project and location.