3' × 5' Double-Sided LED Sign on a Single Pole, 8 Feet Above Ground
1) Project Summary
Install a 3' × 5' double-sided outdoor LED sign with an integrated 1' × 5' illuminated lightbox on a new single-pole mount
2) Sign Dimensions
Static Sign
Static Sign Rendered
Front view of 3' × 5' double-sided LED sign
Rear view of 3' × 5' double-sided LED sign
Side view: 3' × 5' double-sided LED sign
Sign-side mounting brackets
Mounting brackets are provided to attach the LED sign display to the angular frame.
| LED Sign Display Dimensions: | 37.8" × 63.0" × 3.4" |
| Power Requirements: | 3.0 AMPS @ 110V or 6.5 AMPS @ 220V / Side |
| Weight: | 150 lbs / side |
5) Site Map & Location Reference
Installation Location
4900 S. Lancaster Rd
Dallas TX 75216
Existing Site Condition
Proposed Rendering
Proposed Sign with Lightbox
Angular Frame
Full Wrap Trim Cover (Perforated Metal Shroud)
Exploded Assembly View
Side View
Minimum depth between the two sides of the sign — this may be wider based on installation scope and engineer recommendation. The lightbox and LED sign must have a uniform depth to maintain a single cohesive structure. If one is widened, the other must match.
6) Wiring Specifications: How to Connect the Sign
Electrical Recommendations
- Two dedicated 20-amp circuits at 110V — one per side. Circuits must not be shared and must not be on a timer.
- An indoor disconnect switch is recommended to allow power to be safely cut in the event of an emergency or extreme weather.
- The power connection point should be within 5 feet of the sign to accommodate the sign's onboard cables. Running power to that point — whether from a breaker panel, conduit, or junction box — is outside the scope of installation and should be handled by a licensed electrician.
7) How to Install the LED Sign on a Single Pole
