Corner-Mounted Double Sided LED Sign
Install a double-sided corner-mounted LED sign upgrade, with two 3' × 21' single-sided LED displays arranged in a V-shape meeting at the corner of the building, alongside two non-illuminated static signs. The new signs replace the existing outdated corner displays while maintaining the same position for maximum visibility from the freeway in both directions.
2) LED Sign Dimensions
Front view of 3' × 21' LED sign (per wall)
Rear view of LED sign
Side view of LED sign
Sign-side mounting brackets
Mounting brackets are provided to attach the LED sign display to the wall frame.
| LED Sign Display Dimensions: | 3.1 feet X 24.2 feet |
| Power Requirements: | 59.6 AMPS@110V or 29.8 AMPS@220V / Side |
| Weight: | 690 pounds/side |
3) Site Map & Location Reference
Installation Location
6860 S Yosemite Ct
Centennial CO 80112
Existing Site Condition
Proposed Rendering — Side 1
Proposed Rendering — Side 2
Rendered View — One Side
Rendered View — Other Side
Vantage View
4) Wiring Specifications: How to Connect the Sign
Electrical Recommendations
- 4 circuits at 20 amps per side, for a total of 8 for the double-sided sign. Circuits must not be shared and must not be on a timer.
- An indoor disconnect switch is recommended to allow power to be safely cut in the event of an emergency or extreme weather.
- The power connection point should be within 5 feet of the sign to accommodate the sign's onboard cables. Running power to that point — whether from a breaker panel, conduit, or junction box — is outside the scope of installation and should be handled by a licensed electrician.