Table of Contents

1. Project Summary

2. Contractor Requirements

3. Locations & Deadline

4. Scope of Work

5. Scope Limitations

6. LED Sign Specifications

7. Mounting & Electrical References

8. Bid Submission Requirements

9. Submission Instructions & Contact Information

1. Project Summary

LED Sign City is requesting itemized bids from licensed contractors for the installation of one commercial-grade, double-sided LED sign at 1750 East Gate Rd, OH 43614. The project involves installing a high-resolution LED display on an existing monument structure. The new LED sign will enhance visibility, brightness, and content flexibility for dynamic business announcements.

Project Location:
1750 East Gate Rd, Toledo, OH 43614, United States

Display Details:

• Double-sided LED display

• Dimensions: 2.1 feet high × 8.4 feet wide (25.2" × 100.8")

• To be mounted on an existing monument structure.

Contractors will be responsible for conducting site surveys, obtaining necessary local permits, and coordinating stamped engineered drawings if required. The scope includes making final electrical connections to an existing junction box provided by the site’s electrician.

2. Contractor Requirements

To be eligible for this opportunity, contractors must:

• Be properly licensed to perform commercial signage or general contracting work in the state of Ohio.

• Have proven experience with LED sign installations on monument structures.

• Be capable of managing:

  • Site surveys and permit acquisition processes.

  • Coordination of stamped engineered drawings, if required by local codes.

  • Electrical connections to pre-installed junction boxes.

Contractors without prior LED sign installation experience are encouraged to bid if they can demonstrate relevant expertise in commercial signage or electrical work.

3. Locations & Deadline

Project Address:
1750 East Gate Rd, Toledo, OH 43614, United States

Mounting Type:
Double-sided LED sign mounted on an existing monument structure

Bid Submission Deadline:
Wednesday, August 27, 2025, by 5:00 PM (Central Time)

4. Scope of Work

The contractor will be responsible for the following:

• Conduct a site survey to assess monument structure conditions, electrical access, and installation logistics.

• Obtain all necessary local permits for sign installation.

• Coordinate stamped engineered drawings, if required by local code or site conditions.

• Install the new double-sided LED sign onto the existing monument structure using the provided mounting hardware.

• Perform any necessary light fabrication or bracket adaptation to ensure secure attachment and proper fitment.

• Verify the location and accessibility of the existing junction box with the site electrician.

• Coordinate indoor disconnect switch placement with the electrician (if required for code compliance).

• Make final electrical connections between the LED sign and the existing, pre-installed junction box

5. Scope Limitations

The following items are not included in the contractor’s scope:

• Sign content setup, programming, or software configuration.

• Running or installing new electrical wiring.

• Performing electrical service upgrades or changes to the building’s electrical panel.

• Any upstream electrical work beyond the final connection point.

6. LED Sign Specifications

7. Mounting & Electrical References

• Proposed Sign Rendering: A visual mock-up showing the LED sign mounted on the 2-pole structure to illustrate placement, scale, and orientation.

• Mounting Reference Diagram: Technical illustration of the mounting system used to secure the sign to the pole structure, including anchor points and structural interface details.

8. Bid Submission Requirements

Bids must include an itemized cost breakdown covering:

• Site survey.

• Permit acquisition.

• Stamped engineered drawings (if applicable).

• Removal of the existing sign on the monument structure.

• Final electrical connection to the existing junction box.

• Any equipment rental, labor, or light fabrication costs.

• Total project cost, inclusive of labor, materials, and applicable fees.

• Estimated timeline for project start and completion.

• Confirmation of compliance with state and local licensing requirements.

• Contact information for the primary project lead.

9. Submission Instructions & Contact Information

Bid Submission Deadline:
Wednesday, August 27, 2025, by 5:00 PM (Central Time)

Submit Bids To:

• Email: projects@ledsigncity.com
• Email Subject Line: LED Sign Installation – Church of Cross (Toledo, OH)

All bids must be submitted via email in PDF format. Please ensure all required documents and pricing details are included.

Questions or Requests for Additional Files:

• All inquiries, including requests for mounting diagrams, wiring schematics, or site photos, must be submitted via email to projects@ledsigncity.com prior to the deadline.