Double Sided LED Sign: 6x10 Feet

The 6x10 feet double-sided LED sign is a high-visibility digital billboard designed for optimal performance and durability. This assembly guide will walk you through the step-by-step process of constructing the sign, from securing the edges to connecting the wiring, ensuring a seamless setup. With detailed structure diagrams and clear instructions, you'll have all the information needed to assemble your LED sign with confidence, whether you're a seasoned professional or a first-time installer.

1. Introduction

Overview: Brief introduction to the 6x10 feet double-sided LED sign, mentioning its V-shape configuration and key specifications.
Purpose: To provide step-by-step instructions for assembling the modules into a digital billboard.

Step 1: Start with the Edges

Details: Begin assembling the LED sign by securing the edges first.
Instruction: Place the modules at the edges and secure them with bolts.

Step 2: Secure with a Bolt

Details: Insert bolts into the pre-drilled holes.
Instruction: Use the provided bolts to secure the modules to the frame

Step 3: Tighten the Bolt

Details: Ensure all bolts are tightened to stabilize the structure.
Instruction: Use appropriate tools to tighten the bolts securely.

Step 4: Bolt and Secure

Details: Double-check all bolts to ensure they are tightly secured.
Instruction: Go over each bolt once more to confirm they are properly fastened.

Step 5: Connect The Wires

Details: Connect the wiring for both signal and electrical power.
Instruction: Follow the wiring diagrams to connect the signal cables and electrical wires correctly.

3. Structure Diagrams

Diagram 1: Wiring (Signal Cable)

Description: Diagram illustrating the correct wiring path for signal cables.
Purpose: To ensure proper communication between the LED modules.

Diagram 2: Wiring (Electrical)

Description: Diagram showing the electrical connections necessary for powering the LED sign.
Purpose: To ensure a safe and effective power setup.

4. Sign Specifications

Dimensions in Feet	6.3 feet X 10.5 feet
Dimensions in Inches	75.6 inches X 126.0 inches
Display Model	Good - Spotlight Series
Pixel Pitch	P10 - 8500 NITS
Resolution	192 Pixels tall X 320 Pixels Wide
Pixel Density	61440 Pixels / Side
Power Requirements	51.8 AMPS@110V / Side 25.9 AMPS@220V / Side
Weight	600 pounds / side

5. Structure Diagrams for Installation

This 6x10 feet LED sign is depicted in a V-shape, angled at approximately 45 degrees for optimal visibility. The illustration includes details of the sign, pole, and frame structure necessary for installation.