LED Signage Replacement Project in Elizabeth, CO
Table of Contents
7. Mounting & Electrical References
8. Bid Submission Requirements
9. Submission Instructions & Contact Information
1. Project Summary
LED Sign City is requesting itemized bids from licensed contractors for the removal of an existing gas price sign and the installation of a new commercial-grade, double-sided LED sign. This is a replacement project involving installation on an existing monument structure.
Project Location:
36100 Co Rd 13, Elizabeth, CO 80107, United States
Display Details:
-
Type: Double-sided LED sign (replacement)
-
Dimensions: 4 feet high × 10 feet wide
-
Pixel Pitch: P6mm
-
Mounting: On existing monument structure (remove existing sign and replace with new LED sign)
2. Contractor Requirements
To qualify, contractors must:
-
Be properly licensed to perform commercial signage or general contracting work in the state of Texas.
-
Have proven experience with LED sign installations on existing free-standing structures.
-
Be capable of managing:
-
Site surveys and permit acquisition processes.
-
Coordination of stamped engineered drawings, if required by local codes.
-
Electrical connections to pre-installed junction boxes.
3. Locations & Deadline
Project Address:
2825 FM812 Ste 100, Del Valle, TX 78617, United States
Mounting Type:
Double-sided LED sign (2×10) mounted on existing free-standing structure after removal of gas price sign
Bid Submission Deadline:
Friday, October 10, 2025, by 5:00 PM (Central Time)
4. Scope of Work
The contractor will be responsible for the following:
-
Conduct a site survey to assess free-standing structure conditions, electrical access, and installation logistics.
-
Obtain all necessary local permits for sign installation.
-
Coordinate stamped engineered drawings, if required by local code or site conditions.
-
Remove the existing sign from the monument structure.
-
Install the new double-sided LED sign (4×10 P6mm) using the provided mounting hardware.
-
Perform any necessary light fabrication or bracket adaptation to ensure secure attachment and proper fitment.
-
Verify the location and accessibility of the existing junction box with the site electrician.
-
Coordinate indoor disconnect switch placement with the electrician (if required for code compliance).
-
Make final electrical connections between the LED sign and the existing, pre-installed junction box.
5. Scope Limitations
The following items are not included in the contractor’s scope:
-
Sign content setup, programming, or software configuration.
-
Running or installing new electrical wiring.
-
Performing electrical service upgrades or changes to the building’s electrical panel.
-
Any upstream electrical work beyond the final connection point.
6. LED Sign Specifications
7. Mounting & Electrical References
-
Proposed Sign Rendering: Visual mock-up showing the 2×10 LED sign mounted on the existing free-standing structure.
-
Mounting Reference Diagram: Technical illustration of the mounting system used to secure the sign to the brick monument, including anchor points and structural interface details.
- Current Sign
8. Bid Submission Requirements
Bids must include an itemized cost breakdown covering:
-
Site survey.
-
Permit acquisition.
-
Removal of the existing static sign (if applicable).
-
Installation of the new double-sided LED sign on the brick monument.
-
Final electrical connection to the existing junction box.
-
Any equipment rental, labor, or light fabrication costs.
-
Total project cost, inclusive of labor, materials, and applicable fees.
-
Estimated timeline for project start and completion.
-
Confirmation of compliance with state and local licensing requirements.
-
Contact information for the primary project lead.
9. Submission Instructions & Contact Information
Bid Submission Deadline:
Friday, October 10, 2025, by 5:00 PM (Eastern Standard Time)
Submit Bids To:
📧 Email: projects@ledsigncity.com
📌 Email Subject Line: LED Sign Installation – Elizabeth, CO
All bids must be submitted via email in PDF format. Please ensure all required documents and pricing details are included.
Questions or Requests for Additional Files:
- All inquiries, including requests for mounting diagrams, wiring schematics, or site photos, must be submitted via email to projects@ledsigncity.com prior to the deadline.