LED Sign Installation on New Structure Single-Pole Pylon – Littleton, CO

This project involves the installation of a new double-sided LED sign on new structure single-pole pylon structure in Littleton, Colorado. The goal is to enhance roadside visibility while maintaining structural safety and aesthetic alignment with the property. Work includes site surveying, permitting, fabrication, and installation—ensuring the new display integrates seamlessly with existing electrical and structural systems

Sign Configuration

Display Dimensions:	3.2 feet X 6.3 feet
Pixel Pitch:	Beacon P6mm - 7000 NITS
Power Requirements:	17.1 AMPS @ 110V / 8.6 AMPS @ 220V
Weight:	198 lbs

Current Site Conditions

Existing sign type: Single-pole static sign
Environment: Outdoor, visible from the main road
Mounting location: 5301 S Federal Cir, Littleton, CO 80123, USA

1) Scope of Work

A. Site Survey

Assess mounting conditions, pole dimensions, and electrical access

Document measurements and provide recommendations for installation logistics

B. Permitting & Compliance

Obtain all required local sign permits
Coordinate stamped engineered drawings if required by jurisdiction or site conditions

C. Fabrication & Installation

Install an LED sign on the new structure pole.
Mount the 3 feet by 6 feet double-sided LED sign
Each LED sign face is 3.4 inches deep, and the two sides must be installed 8 inches apart to ensure proper ventilation and structural spacing.
Install perforated panels or equivalent covers to enclose the 8-inch gap between the LED sign faces, supporting both airflow and aesthetics.
Perform light fabrication, bracket modification, or reinforcement as needed for a secure and stable fit.
Verify junction box location and accessibility.
Coordinate indoor disconnect switch placement with the site electrician (if required).
Complete final electrical connection between the LED sign and the existing, pre-installed junction box.
Pole covers around the existing structure to enhance appearance and give the installation a more substantial, finished profile.

2) Scope Limitations (Excluded)

Sign content setup, programming, or software configuration
Running new electrical circuits or feeders
Panel upgrades or other upstream electrical work beyond the final connection point

3) Proposed Sign & References

Proposed Sign Rendering: Visual mock-up showing LED sign on new single pole center mount placement, scale, orientation.

For more information on mounting style, click here

Measurement

Sign Location

Proposed Rendering

Mounting Reference Diagram: L-bracket system illustrating anchor locations and structural interfaces