How to Set Power On/Off Schedules in ViPlex Express: Step-by-Step Guide
Managing your LED sign's power schedule is crucial for efficiency and longevity. ViPlex Express allows you to automate power on/off times, ensuring your sign operates exactly when you need it. This guide walks you through the process step by step.
Step 1: Open ViPlex Express
Ensure that your LED sign is connected to ViPlex Express. Open the application and navigate to the Control panel.
Step 2: Access Power Control
- In the Control panel, find and select Power Control.
- Look for your device under the Taurus Series section. It should be labeled as Taurus 000XXXX (with your unique identifier).
Step 3: Set Up a Scheduled Power Control
- Select Scheduled from the available options.
- Click New to create a new power schedule.
- Under Controlled Device, choose Screen Power to set up the schedule for your LED sign.
Step 4: Configure Power On/Off Settings
- Check the "Power On" option and set your preferred Power On Time.
- Check the "Power Off" option and set your preferred Power Off Time.
Step 5: Define the Repeat Schedule
- Choose a Repeat Method:
-
- Daily (Same schedule every day)
- Custom (Select specific days)
- Set the Validity Period:
-
- Choose a Start Date & Time.
- Choose an End Date & Time (if needed).
Step 6: Save and Apply the Power Schedule
- Click OK to confirm your settings.
- Select Apply to activate the power schedule on your sign.
Step 7: Confirm Success
- Select Read Back to verify that the schedule has been successfully applied to your LED sign.
- If needed, go back and adjust any settings for accuracy.
Final Thoughts
Setting a power schedule in ViPlex Express ensures that your LED sign operates efficiently while conserving energy when not in use. By automating power cycles, you can optimize your sign's lifespan and performance with minimal manual intervention.