How to Set a Static IP Address for Your LED Sign

When connecting your LED sign for reliable network communication, setting a static IP address ensures your device maintains the same IP every time. Follow these steps to configure your static IP for the Sign City network.

Table of Contents

1. Step 1: Connect to the Access Point (Sign City Network)
2. Step 2: Set the IP Address Manually
3. Step 3: Confirm the Connection to the Sign via Ping

Step 1: Connect to the Access Point (Sign City Network)

1. Open your Wi-Fi settings on your computer by clicking the network icon in the taskbar.
2. Look for the network labeled Sign City and connect to it.
3. Note: It’s normal for the status to say No Internet once connected to the Sign City network.

Step 2: Set the IP Address Manually

1. Open the Start Menu, type Control Panel, and select Control Panel from the results.
2. Inside Control Panel, click on Network and Internet, then Network and Sharing Center.
3. See Wi-Fi (Signcity) in the active network. Click on change adapter settings. 
4. In the Ethernet window, right click Properties.
5. Scroll down and double-click on Internet Protocol Version 4 (TCP/IPv4), then properties. 
6. Choose Use the following IP address and enter the details:
• IP Address: 192.168.1.126
• Subnet Mask: 255.255.255.0
7. Click OK and close all windows to apply the settings.

Step 3: Confirm the Connection to the Sign via Ping

1. Open the Start Menu, type CMD, and select Command Prompt.
2. In the Command Prompt, type the following command and press Enter:

ping 192.168.1.128

1. If the connection is successful, you will see replies similar to:

Reply from 192.168.1.128: bytes=32 time=XXms TTL=64

By following these steps, you’ll have successfully set up a static IP address for your LED sign, ensuring a stable and predictable network connection. If you encounter any issues, please refer to our troubleshooting guide or contact support for assistance.