How to Set a Blackout Schedule in Vnnox-A Step By Step Guide
Setting a blackout schedule in Vnnox allows you to control when your LED sign turns on and off, helping you save energy, extend the lifespan of your display, and comply with local county regulations regarding digital signage operation.
Table of Contents
- Step 1: Access Control Settings
- Step 2: Configure Normal Operation Time (When the Sign is ON)
- Step 3: Configure Blackout Time (When the Sign is OFF)
- Final Steps
Step 1: Access Control Settings
Log into Vnnox and navigate to the Control panel. Select Screen Status Control to manage your LED sign’s operational settings.
Step 2: Configure Normal Operation Time (When the Sign is ON)
The Normal Operation Time determines when your LED sign will turn on each day.
- Select Taurus (your controller model).
- Click on Normal, then choose Schedule Control.
- Select Normal-Operation Time and set the Repeat Frequency (how often the schedule should apply).
- Example: If you want the sign to turn on at 6:00 AM every day, enter that time and select Everyday.
- Click OK, then select Apply to save your settings.
Step 3: Configure Blackout Time (When the Sign is OFF)
The Blackout Time determines when your LED sign will turn off each day.
- Click New Schedule Control and choose Blackout.
- Select Schedule Control and set the Blackout-Operation Time and Repeat Frequency (just like the normal operation schedule).
- Example: If you want the sign to turn off at 8:00 PM (20:00) every day, enter that time and select Everyday.
- Click OK, then select Apply to save the blackout schedule.
Final Steps
Double-check your schedule to ensure accuracy. Monitor the sign to confirm it follows the scheduled times. Check your local county regulations to ensure compliance with any restrictions on digital sign operation, such as permitted hours and brightness levels.
By following these steps, you can efficiently manage your LED sign’s operation while ensuring compliance with local laws and optimizing performance.