In this blog, we’ll guide you through the steps to create, configure, and upload content to your LED sign using XM Player. Follow these steps to make the most of your LED display with XM Player. 

Table of Contents

• Create a New Program
• Set Up Program Settings
• Add Elements to the Program
• Resize in Preview
• Upload Image or Video
• Send Program to Sign
• Send Solution via IP Address

1. Create a New Program

• Click "File" and select "New" to create a new program page.

2. Set Up Program Settings

• Change settings to match your ad specifications.
• Rename the program (e.g., "LED Sign City").
• Set playback options (e.g., play once).
• Adjust "Left" and "Top" to control positioning (optional).
• Set "Width" and "Height" to match your sign's resolution.

3. Add Elements to the Program

• Select the element you want to play.
• Click "File" to open the file preview pop-up.
• Click and drag the file window to adjust the "Left" and "Top" positioning.
• Use the preview window to see your LED sign’s display.
• Adjust the file size to match your screen dimensions.
• Use the alignment tool to set the element’s alignment on the sign.

4. Resize in Preview

• Open the preview window.
• Click on the file to access the size dropdown.
• Select "Full Screen" or adjust as needed.

5. Upload Image or Video

• Click "Add File" to upload the image or video you want on your sign.
• When done, remember to save your solution by clicking on file, save.

6. Send Program to Sign

• Ensure you’re connected to your sign.
• Go to "File" and select "Send Current Program" to transfer the current program to your sign.

7. Send Solution via IP Address

• If the IP address is connected, it will appear in the terminal.
• Click the checkmark next to the IP address.
• Click "Send" to transfer the solution to your sign.