How to Install Your Elite Series Taxi Top LED Sign

Installing your Elite Series Taxi Top LED Sign is quick and easy. Follow these simple steps to get your sign mounted securely on your vehicle’s roof rack:

---

What You’ll Need

• Tool Required: Tamper-proof T30 star bit.

---

Step-by-Step Installation

1. Remove the Brackets

   • Use the T30 star bit to remove the four screws securing the two brackets on the bottom of the sign.
   • Set the brackets and screws aside for reinstallation later.

2. Position the Sign

   • Place the taxi top sign on your roof rack.
   • Adjust its position so it aligns with the width of your vehicle’s roof rack.

3. Adjust and Reattach the Brackets

   • Adjust the bracket plates to fit your roof rack.
   • Reattach the brackets using the screws you removed earlier. Tighten them securely with the T30 star bit.

4. Ensure Stability

   • Before driving, check that all screws are tight and the sign is stable. Ensure the brackets are holding the sign securely.

---

Pro Tip

• Connect the power cable to the bottom of the sign before mounting it to the roof. The space might be tight once the sign is installed.

Now that your sign is mounted, you’re ready to connect the power cables and start advertising!