How to Assemble Your LED Sign: Step-by-Step Guide
Assembling your LED Sign City display is straightforward when you follow these organized steps. This guide walks you through the entire process, from identifying your sign sections to completing the full assembly.
📦 Step 1: Identify Sign Sections
Each LED sign is made up of labeled sections such as A–B, A–G, or A–X, depending on the sign size. Typically:
-
Each section is a maximum of 4 ft x 4 ft.
-
The bottom row is the starting point for assembly.
Check your assembly diagram to determine the layout and placement of each section.
🔧 Step 2: Assemble the Bottom Row
-
Locate the first bottom section (e.g., Section A) and connect it to the frame.
-
Bring in the next section and align it accordingly.
-
For signs up to 4 ft tall, each section will require:
-
8 bolts (2 per side),
-
3 brackets with 4 bolts each to secure the sections together.
-
➡️ Repeat this step across the entire bottom row until it is fully assembled.
Note:
-
The outer edges must have closed caps.
-
Washers sit between sections—make sure they don’t fall out before inserting the bolts.
🧱 Step 3: Assemble the Top Row
Once the bottom row is complete:
-
Refer to your diagram again. For example:
-
If the bottom is labeled A–G, then the top row might be H–M, positioned above and in reverse order.
-
-
Seat the first top section (e.g., Section H) directly on top of the matching bottom section.
-
Insert bolts to link the top and bottom and left and right, for example:
-
8 bolts if the section is 4 ft wide.
-
6 bolts if the section is 3 ft wide.
-
-
Secure with 3 brackets (4 bolts per bracket).
-
Move to the next section and repeat the bolt and bracket process.
Continue this process for each top section until all are securely attached.
✅ Final Steps
-
Double-check all bolts and brackets are secure.
-
Repeat the entire assembly process for the second side if your sign is double-sided.
-
Use your wiring diagram to correctly connect power and data cables in the right sequence.
🛠️ Need Help?
If you have any questions during assembly, we’re here to help.
📞 Call us at: 866-343-4011
📧 Email support: support@ledsigncity.com