Case Study: Connecting an LED Sign to the Internet and Publishing Content
Objective: This guide provides a detailed approach to helping customers program their antenna, verify network settings, and connect and publish content to an LED sign using VNNOX. This case is based on a recent successful support call.
Background: Miss Deanna needed to bring her LED sign online, located at a city park, and configure it for content display. The process required ensuring that the antenna was correctly configured and powered, and the sign was connected to the VNNOX platform.
Step 1: Verifying Antenna Connection
-
Initial Network Check:
- The network should be configured to "SignCity." If "SignCity" is not visible, check for the network "CPE-XXXX" (CPE followed by some numbers).
- If neither "SignCity" nor "CPE-XXXX" is visible, it suggests that the antenna is not powered on.
-
Verify Antenna Power:
- Ensure that the antenna is plugged into the correct port on the sign.
- Check that the lights on the front of the antenna are lit. If they are not, the antenna may not be receiving power.
Step 2: Programming the Antenna
-
Accessing Antenna Settings:
- If "CPE-XXXX" is available, connect to it.
- Open a web browser and navigate to
172.16.0.1
to access the antenna’s settings. - Log in using the default credentials (
admin/admin
).
-
Network Setup:
- Use the setup wizard to select "4G Mode."
- Rename the Wi-Fi network to "SignCity" and set a secure password (e.g.,
SignCity123
). - Save and reconnect to the "SignCity" network.
-
APN Configuration:
- In the APN settings, enable manual configuration.
- Set the APN name to
VZWInternet
and apply the changes. - The antenna will reboot, and the sign should be connected to the internet.
Step 3: Connecting to VNNOX
-
Logging into VNNOX:
- Go to
us.vnox.com
and log in using your credentials. - Verify that your sign (player) is listed under "Screens" and shows as online.
- Go to
-
Uploading Content:
- Navigate to the "Content" section in VNNOX.
- Upload your pre-designed ads (e.g., from Canva) to the content library.
-
Creating a Solution:
- Create a new solution by selecting "Regular Solution" under "Solutions."
- Add your player and set the screen size.
- Add slides by selecting media (images/videos) and configuring them to full screen.
- Publish the solution to the sign.
Step 4: Adjusting Brightness Settings
-
Auto Brightness Configuration:
- Access "Terminal Control" under the AP network in VNNOX.
- Verify that the brightness sensor is functioning correctly and that the sign adjusts brightness automatically based on ambient light.
-
Manual Brightness Adjustment:
- If needed, adjust brightness manually in VNNOX to ensure it suits both day and night conditions.
Conclusion: By following these steps, Miss Deanna successfully brought her LED sign online, connected it to the VNNOX platform, and configured it for content display. This guide provides a clear, repeatable process for other customers facing similar challenges, ensuring effective and efficient sign management.